The CF-Auto-Root Galaxy S5 on Android 5.0

The CF-Auto-Root Galaxy S5 on Android 5.0

Utilizing the CF-Auto-Root record by XDA designer Chainfire, you can root the European variation of Galaxy S5 (SM-G900F), which as of late got Android 5.0 Lollipop stock firmware update with construct G900FXXU1BNL2.

The CF-Auto-Root Galaxy S5 on Android 5.0

The CF-Auto-Root is intended to be utilized as a part of blend with stock Samsung firmwares and considered as the fastest and least demanding method for rooting Android fueled gadgets.

On the off chance that you have officially introduced Android 5.0 on your Galaxy S5 and now wish to pick up root access, look at the accompanying root technique.

Key notes

Guarantee that you have introduced essential USB drivers for Galaxy S5

EnableĀ USB Debugging Mode on telephone to interface it with the PC and utilization Android SDK with it. [Navigate to Settings>> About phone>> tap Build number seven times. A pop up will show up, that understands, ‘You are presently a designer.’ Go back to the Developer alternatives and check USB investigating and snap OK.]

As the instructional exercise is liable to wipe out all information of the telephone, make a reinforcement utilizing custom recuperation

Check the battery rate of the telephone, it ought to be no less than 80%

Rooting the gadget will void the producer’s guarantee

The CF-Auto-Root document chips away at with Galaxy S5 SM-G900F and blazing this on any off base variation may block the gadget. Check the model number of the telephone by exploring to Settings>> About device>> Model number

Root Galaxy S5 SM-G900F on Android 5.0 Lollipop utilizing CF-Auto-Root

Step-1: Extract the downloaded root bundle on the PC to get a document with .tar.md5 augmentation

Step-2: Switch off the Galaxy S5 and enter Download mode by holding Home, Power and Volume Down catches together until the development Android robot and a triangle show up on the telephone’s screen. Press the Power catch again to enter Download mode

Step-3: Ensure that Galaxy S5 USB drivers are introduced on the PC

Step-4: Launch Odin on the PC

Step-5: Connect the Galaxy S5 to the PC utilizing USB link while it is in Download mode. At the point when the telephone is associated effectively, one if the ID: COM boxes will turn blue with the COM port number. This stride may take sooner or later

Step-6: In Odin click the AP catch and select the .tar.md5 document that was extricated in step-1

Step-7: Check that the Auto-reboot and F.Reset Time alternatives are not chose in Odin

Step-8: Double check everything and hit the Start catch in Odin to start the establishment process. This will take a couple of minutes to finish

Step-9: When the establishment procedure is finished, the telephone will reboot into recuperation mode and introduce the root bundle. The ID: COM box will then turn blue

Step-10: You can securely unplug the telephone from the PC, once the home screen appears

Investigate:

Now and then the telephone does not boot into recuperation and roots the gadget, if this happens, re-try the whole process. In the event that you discover the telephone is still not rooted, at the end of the day perform the instructional exercise, but rather this time watch that Auto Reboot alternative in Odin in not checked.

At that point haul out the battery to kill the telephone commandingly. Presently squeeze Volume Up, Home and Power catches together to boot the telephone into recuperation mode. This will begin the introduce procedure to root the telephone.

Your Galaxy S5 ought to be rooted at this point. Weigh for SuperSU application in your application list.

 

One Response

  1. rooted android now what March 18, 2016

Leave a Reply